Copyright(C)SaeMah. All right reserved
Turn Table은 계류 로프나 와이어 로프를 설치할 때 발생할 수 있는 꼬임을 방지하는 장치입니다. 로프를 가장 효율적으로 풀어내는 방식으로, 바깥쪽 끝에서 자연스럽게 풀리도록 도와 작업 중 비틀림이나 엉킴을 최소화합니다.
장점
• 작업 효율 향상: 로프를 더 빠르고 쉽게 다룰 수 있어 전체 작업 시간이 줄어듭니다.
• 안전성 강화: 로프의 꼬임과 꺾임을 방지해 작업 중 발생할 수 있는 위험 요소를 줄여 줍니다.
• 다양한 현장 대응: 여러 종류와 크기의 로프를 다룰 수 있어 다양한 작업 환경에서 활용이 가능합니다.
• 보관 공간 최적화: 로프를 깔끔하게 정리할 수 있어 보관 공간을 더 효율적으로 사용할 수 있습니다.
OCIMF Effective Mooring Fourth Edition 인용
Removing wires from coils and reels
Do not open a new coil of wire without a turntable or similar equipment.
⇒ 턴테이블 또는 유사한 장비 없이 새로운 와이어 코일을 열지 말 것.
Removing wires incorrectly will cause kinking and damage.
⇒ 와이어를 잘못 풀어내면 꼬임(kinking)과 손상이 발생한다.
Care of wires
Avoid leading wires around sharp edges or running them through a lead that is not in line with the winch drum, to prevent damage to the wire.
⇒ 와이어가 손상되지 않도록, 날카로운 모서리를 통과시키거나 윈치 드럼과 일직선이 아닌 리드(guide)를 통해 통과시키는 것을 피할 것.
Avoid crossing wires on the drum because this will crush or flatten them.
⇒ 드럼에서 와이어가 서로 교차되는 것을 피할 것. 이는 와이어를 눌러 찌그러뜨리기 때문이다.
Avoid kinking wires because this will open up the wire strands.
⇒ 와이어의 꼬임(kinking)을 피할 것. 이는 와이어 스트랜드를 벌어지게 만든다.
Avoid leading wires around tight angles because this will weaken them and can cause them to break under a high load.
⇒ 좁은 각도로 와이어를 꺾어 이끄는 것을 피할 것. 이는 와이어를 약화시키며 고하중에서 단선이 발생할 수 있다.
서버와 네트워크에 문제가 있습니다.
별도로 문의바랍니다.
창을 닫지 마시고 잠시만 기다려주십시오.
빠른 시간 내로 답변드리겠습니다.
방문해 주셔서 감사합니다.